Hitachi Group
Products & Services

Hitachi Group
Corporate Information

CASE STUDY

Casting Simulation System ADSTEFAN

topImage

Analysis examples will be introduced about typical shapes such as die casting and gravity casting.

1. Die-casting/Evaluation of filling behavior in
2. Die-casting/Analysis of Molten Metal Behavior
3. Thixomolding/Evaluation of Cold Shut
4. Sand casting/Shrinkage analysis
5. Sand casting/Comparison of molten metal

1. Die-casting/Evaluation of filling behavior in

Temperature distribution during filling
(open in new window)

Air behavior during filling
(open in new window)

Movement of initial inclusions
(open in new window)

PAGE TOP

2. Die-casting/Analysis of Molten Metal Behavior

Air contact time during filling
(open in new window)

Molten Metal Behavior Inside Sleeves
(open in new window)

Temperature distribution of plunger tip
(open in new window)

PAGE TOP

3. Thixomolding/Evaluation of Cold Shut

The contribution of each gate
(open in new window)

Defect and analysis result comparison
(open in new window)

PAGE TOP

4. Sand casting/Shrinkage analysis

Shrinkage (RiserΦ120mm)
(open in new window)

Defect comparison

Defect comparison

Shrinkage (RiserΦ160mm)
(open in new window)

Defect comparison

Defect comparison

PAGE TOP

5. Sand casting/Comparison of molten metal

Actual measurement (open in new window)

Analysis result (open in new window)

PAGE TOP

Agent

CONTACT US

Casting Simulation System ADSTEFAN